How To Remove Security Tag?

Surprisingly, how to remove security tag is the most searched question on the internet. Security tags are small signal transmitters that are firmly attached to their products. Cashiers sometimes accidentally forget to remove the bulky security tag off the items. So, today, I will reveal how to remove security tags from clothes. Removing security tags without damaging the clothes can be a challenging task! Worry no more, here I’ve put an entire list of easy methods for eliminating security tags at home. If you want to remove this device on your own, then keep on reading to know how to remove security tag.

How To Remove Security Tag?

Using the following methods, you can easily learn how to remove security tag.

  1. By Using A Rubber Band
  2. By Using A Screwdriver
  3. By Using Needle Nose Pliers
  4. By Using A Fork
  5. By Using A Magnet
  6. By Hitting The Tag
  7. By Freezing The Tag
  8. By Burning The Tag
  9. By Using Brute Force

The tag acts like an alert when someone tries to steal the item without paying the money. There are three types of security tags: mechanical, magnetic, and ink security tags. These security tags come in different shapes such as circular, cube, and pencil. So, you need the right tools when it comes to removing the security tag.

You can keep on reading to know how to remove store security tags in a matter of seconds. 

Click here – How To Remove Permanent Marker?

Remove Security Tag By Using A Rubber Band

A rubber band is widely used to remove security tags. Follow these steps to know how to remove the clothing security tag in detail.

  1. Place the ink cartridge (the part that sticks out of the plastic) of the tag face-down.
  2. Now, pull the tag as far away as possible from the rest of the clothing.
  3. Then, wrap the rubber band around the pin of the tag.
  4. With one hand, hold the bigger part of the tag and remove the pin with another hand.
  5. Apply enough pressure so that the pin easily pulls apart from the tag.

Make sure the rubber band should be large and thick enough to loosen the pin. You can repeat the last last two steps again if the rubber band doesn’t loosen the tag.

Remove Security Tag By Using A Screwdriver

A screwdriver having a flat end can easily remove security tags off clothing. Follow these steps to know how to remove a security tag using a screwdriver.

  1. Place the ink cartridge (the part that sticks out of the plastic) of the tag face-down.
  2. Now, pull the tag as far away as possible from the rest of the clothing.
  3. Place and slide around the flat end of the screwdriver underneath the ink cartridge.
  4. Firmly press the screwdriver under the cartridge to pierce and pull up the plastic.
  5. Push the screwdriver handle down till the perimeter pops up.
  6. After this, you’ll see a silver paper lining covering a metal plate beneath it.
  7. Gently remove the silver paper lining.
  8. Using the screwdriver, lift one of the metal arms that hold the pin.
  9. Lastly, pull away the pin from the tag to remove the tag.

For this method, make sure you only use a screwdriver with a flat end, or else the tag won’t be removed.

Remove Security Tag By Using Needle Nose Pliers

Needle nose pliers are cutting and holding pliers used by artisans and jewelry designers. Luckily, you can use this tool to remove security tags from clothes and other items. Follow these steps to know how to remove security tags from clothes with your hands.

  1. Place the ink cartridge (the part that sticks out of the plastic) of the tag face-down.
  2. Now, pull the tag as far away as possible from the rest of the clothing.
  3. Using one plier, grip one side of the tag.
  4. And grip the other side of the tag using another plier.
  5. Gently bend the tag down from both sides using the pliers.
  6. Keep bending it until the pin is loosened up.
  7. Lastly, pull away the pin from the tag to remove the tag.

Make sure you don’t apply too much pressure while bending the tag or else the ink can spill out.

Remove Security Tag By Using A Fork

You must be surprised to know that you can remove security tags by using forks! Follow these steps to know how to take off security tag with a fork.

  1. Place the ink cartridge (the part that sticks out of the plastic) of the tag face-down.
  2. Now, pull the tag as far away as possible from the rest of the clothing.
  3. Insert two forks on either side of the tags.
  4. Then, gently pull both forks in the opposite direction till the tag loosens.
  5. Lastly, pull away the pin from the tag to remove the tag.

You won’t believe, this is the most effective tag removal method on the list.

Remove Security Tag By Using A Magnet

A high-powered magnet can be used to deactivate tags in stores. Follow these steps to know how to remove the security tag with a magnet.

  1. Directly place the dome side of the tag against the high-powered magnet.
  2. Now, pull the magnet away from the tag.
  3. If the tag is disabled, you’ll hear a sound.
  4. You can remove the pins from the tag by twisting them.

Make sure you apply enough force while removing the tag with electromagnetic devices.

You can keep on reading to check out how to remove security tag without magnets.

Remove Security Tag By Hitting The Tag

You can also forcefully remove the security tags by simply hitting the tag. Follow these steps to know how to remove security tags from shoes.

  1. First, pull the tag away from the shoes a few times.
  2. Once the pin is a bit loose, keep the long plastic part of the tag away from the item.
  3. Place a large nail on the ink cartridge.
  4. Using a hammer, hit down the head of the nail onto the tag till it pops open.
  5. Repeat this step a couple of times to get it properly. 
  6. Lastly, pull away the pin from the tag to remove the tag.

Keep in mind that the nail should be bigger than the tag. Also, the head of the nail should be as wide as a penny. Make sure you don’t apply too much force or the tag will burst open.

Remove Security Tag By Freezing The Tag

Another super easy way to remove security tags from clothes is freezing the tags! Follow these steps to know how to remove the security tag from a bottle.

  1. Simply place the bottle with a security tag in a freezer.
  2. Take the bottle out from the freezer and let it rest for at least an hour.
  3. After an hour, remove the tag using scissors.

You can even use pliers or rubber bands if you do not have scissors. This method is a lot safer because the ink won’t spill as it is frozen.

You can keep on reading to know how to remove security tag Target.

Remove Security Tag By Burning The Tag

Did you know you can burn the tag to remove it from items? Follow these steps to know how this tag removal method actually works.

  1. Place the ink cartridge (the part that sticks out of the plastic) of the tag face-down.
  2. Now, pull the tag as far away as possible from the rest of the clothing.
  3. Using a candle or lighter, burn the tag’s dome-shaped region for a few seconds.
  4. After a while, the plastic will almost likely catch fire.
  5. Then, scrape the melted plastic portion using pliers or a knife.
  6. Remove the spring connected to the base while scraping.

Make sure you work very carefully while burning the tag or else you’ll end up damaging your clothes.

Remove Security Tag By Using Brute Force

Follow these steps to know how to remove security tags using Brute Force.

  1. Place the ink cartridge (the part that sticks out of the plastic) of the tag face-down.
  2. Now, pull the tag as far away as possible from the rest of the clothing.
  3. Then, place something between the tag and the head of the pin.
  4. Apply a bit of pressure to bend the pin back and forth until it breaks.
  5. Lastly, pull away the pin from the tag to remove the tag.

You can search for more different topics on Remowz

Click here – How To Remove Super Glue?

FAQ

How Do You Remove A Clothing Security Tag At Home?

To remove them at home, use a high-powered magnet, such as a hard drive magnet. Place the magnet on a flat surface and lay the tag on top of it with the ink dome or cartridge facing down. You should hear a click letting you know the tag has deactivated. Wiggle the pins in the tag up and down to release them.

What Tool Is Used To Remove Security Tags?

D019 clothing sensor remover tool is made of high quality magnet. This anti theft clothing tag remover is able to remove pins from almost all magnetic hard tags. This clothes sensor removing device is compatible with all standard or super lock retail security tags.

Are All Security Tags Magnetic?

There are two widely used types of locking mechanisms available; magnetic and mechanical, with magnetic tags available in a series of strengths ranging from standard to SuperLock, HyperLock and Multi-polar.

What Happens If You Cut A Wire Security Tag?

If you take the security tag off the jacket and leave the store with it, on top of being charged with removal of the device, you could also be prosecuted for theft. The charges for this offense range from a simple misdemeanor to a class “C” felony.

Is There Ink In Security Tags?

But there’s an important reason security tags are filled with ink –– it can be a helpful measure for retailers and deter potential shoplifters. If an item with an ink tag is purchased at a store, the cashier will remove it with a special device called a detacher after the customer pays.

Use scissors, a screwdriver, a high-powered magnet, a knife, or a pair of pliers. With a magnet, place it on the table and position the tag bottom side down on the magnet. You should hear it click. Manipulate the pin up and down, and it should come out.

Does Security Tag Ink Wash Out?

“If there is a heavy amount of ink on the fabric, it may not be possible to remove the stain. If only a small amount contacts fabric, it may be possible to lighten or remove the stain.” It all depends on the fabric, the composition and concentration of the staining substance, and how long the stain has set in.

What Is The Hardest Security Tag To Remove?

In terms of security, shell tags are the shape considered hardest to prise open and remove illegally. In addition to the strength of the locking mechanism and shape of the tag, a key factor to consider when selecting clothing tags is the size of the pin-head.

Conclusion

In the above post, I’ve discussed different types of security tags and how to remove them. Security tags are one of the most crucial parts of an EAS system. It is applied to the goods using a pin. There are various ways to remove security tags without damaging the items. You can use a rubber band, screwdriver, needle nose pliers, fork, or magnet to disable the security tag. Most modern tags contain electromagnets, so applying the Brute Force or hitting the tag with a hammer will loosen them. You can now easily get rid of annoying security tags by learning how to remove security tag.

 

To Know Some Great Stuff Do Visit BestMoviesIn

To Know Some Great Stuff Do Visit BioCaptions

To Know Some Great Stuff Do Visit BiosWikis

To Know Some Great Stuff Do Visit Caresclub

To Know Some Great Stuff Do Visit CaresGuru