How To Remove Rhino Liner?

How To Remove Rhino Liner? Rhino Liner is a type of spray-on protective coating that is commonly used on truck beds, boat decks, and other surfaces that need to be protected from wear and tear. While Rhino Liner is known for its durability and long-lasting protection, there may come a time when you need to remove it. In this blog post, we will guide you through the process of removing Rhino Liner.

How To Remove Rhino Liner?

Step 1: Prepare The Area

Before you begin removing the Rhino Liner, you need to prepare the area. Cover any nearby surfaces with plastic sheeting or drop cloths to protect them from damage. Wear protective gloves, goggles, and a mask to protect yourself from fumes and debris.

Step 2: Heat The Rhino Liner

The first step in removing Rhino Liner is to heat it. This will soften the liner and make it easier to remove. Use a propane torch or heat gun to apply heat to the Rhino Liner in a circular motion. Be careful not to overheat the surface, as this can cause damage.

Step 3: Scrape The Rhino Liner

Once the Rhino Liner is heated, use a sharp metal scraper or putty knife to scrape it off. Start at one edge of the surface and work your way across, applying pressure to remove as much of the liner as possible. Be careful not to damage the underlying surface.

Step 4: Sand The Surface

After you have removed as much of the Rhino Liner as possible, use a coarse sandpaper to sand the surface. This will help to remove any remaining liner and prepare the surface for a new coating. Use a vacuum or damp cloth to clean up any debris.

Step 5: Repeat The Process

If there is still some Rhino Liner remaining on the surface, repeat the heating and scraping process until all of it is removed.

You can search for more different topics on Remowz


Can Spray On Bedliner Be Removed?

Use the gun to heat up the liner pieces and then use the chisel to chip them away. A paint scraper is a popular tool for this job, but if you want a more intense tool, you can also try an aggressive air chisel. Body shop pros agree: when it comes to removing a spray-in liner, this is probably your best option.

How Do You Remove Bedliner Spray Without Damaging Paint?

If the spray is light, you might be able to remove it with a mix of water, dish soap, and a sponge. If a simple wash doesn’t work, a clay bar kit can be used to remove light overspray. Just be sure to follow the instructions that come with your clay bar kit closely.

What Is The Best Way To Remove The Raptor Liner?

RAPTOR is a coating made to last, so it is difficult to remove once cured. Once RAPTOR is cured, remove it by sanding it off with P80 grit sandpaper either down to the original substrate or to bare metal. Then, respray the surface with another coating, like OEM paint colors (required).

Can You Sandblast Rhino Liner Off?

It can be done with sandblasting, but more advanced superalloy blast abrasives are better options. With time, the bed liner can fade, chip, bubble, rip, or crack, making it cosmetically unattractive and removing the protection from the bed itself.


In conclusion, removing Rhino Liner is a time-consuming process that requires careful preparation and attention to detail. Heat the Rhino Liner, scrape it off, sand the surface, and repeat the process if necessary. By following these steps, you can safely and effectively remove Rhino Liner from any surface.


I Have Covered All The Following Queries And Topics In The Above Article

How To Remove Rhino Liner From Paint

How To Remove Paint From Rhino Liner

How Hard Is It To Remove Rhino Liner From The Body Of A Truck

How To Remove Rhino Liner Without Damaging Paint

How To Remove Rhino Liner Without Damaging Paint

Chemicals To Remove Bed Liner

Will Sandblasting Remove Bed Liner

How To Remove Rhino Liner From Plastic

How To Remove Raptor Liner

How To Remove Rhino Liner Overspray

How To Remove Bed Liner From Paint

Can You Sand Off Rhino Liner

How To Remove Rhino Liner

What chemical is used to remove bed liner

What chemicals are used to remove bed liner